Correcting Dofus Retro Cra mistakes takes more than buying new gear. Low damage may come from resistance, unused AP from minimum range and defeats from a poor starting cell. Without diagnosis, an expensive upgrade can hide the actual cause.
This guide starts with symptoms and isolates causes. It complements the complete Cra guide without repeating builds: every correction must create a measurable difference.
Use a five-step diagnostic method
- Describe the symptom with a metric and context.
- Keep the board, group, gear and order constant.
- State one testable cause.
- Change one variable across a comparable series.
- Accept or reject the correction from results.
“My Cra is bad” cannot be tested. “It leaves two AP unused on small Blop boards” identifies behaviour, terrain and an indicator.
Connect symptoms, causes and evidence
| Symptom | Likely cause | Evidence |
|---|---|---|
| Low damage | Resistance or missing breakpoint | Minimum roll by target |
| Unused AP | Impossible combo or line | Rejected action in the turn |
| Frequent contact | Bad distance calculation | Enemy MP after control |
| High food use | Battle too long | Health lost per round |
| Variable duration | Mixed board profiles | Results by layout |
The matrix does not prescribe the correction. It names the data that must confirm a cause before spending kamas or rewriting a profile.
Low damage despite a high characteristic
Check the priority target’s element and resistance, followed by fixed damage, spell rank and minimum roll. A high characteristic does not always overcome an unfavourable monster or under-levelled spell.
Compare the same spell on the same enemy before and after correction. When the sheet improves but duration does not, the issue may be the number of actions needed to finish.
Unused AP at the end of turns
Recurring AP usually means the total does not match action costs, minimum range blocks the secondary spell or a use limit has been reached. Record the exact action that should have followed.
The solution may be another sequence, earlier movement or a different AP breakpoint. The Cra gear guide compares breakpoint cost with actual use.
Overkill and inefficient finishing
Using the largest spell on a nearly defeated enemy spends a resource that could prepare the next target. Record excess damage and remaining enemy actions after the round.
Add a finisher whose minimum roll is sufficient, then move the heavy action to the next threat. The goal is to remove more enemy turns rather than display one large number.
Enemies reach Cra too often
Reconstruct the failure round: initial distance, enemy MP, successful removal, pushback and final cell. Contact may come from control used too early or movement toward an edge with no exit.
Calculate safety from the opponent’s remaining MP. The Cra solo PvM guide supplies the kiting loop; diagnosis identifies the exact step that stopped working.
Blocked line or unusable range
Separate solid obstacle, allied blocker and target inside minimum range. Each requires a different correction. Additional range fixes none when the attack cannot be launched.
Test one lateral cell while preserving AP for the rest of the turn. In a party, change the ally’s parking position before rebuilding Cra.
Defeats cluster on compact boards
Filter results by starting distance. When success collapses only below a cell count, the whole build is not necessarily weak; the close-range branch or board selection is missing.
Test Vitality, one MP, earlier pushback or board rejection separately. Accepting fewer battles can raise hourly yield by removing deaths.
Battles are won but take too long
Split duration into placement, buffs, damage, chasing the last target and team animations. Slowdown often occurs after the main threat has already disappeared.
Remove buffs that never pay back, change finishing priority or reduce group size. A richer win is not optimal when extra time exceeds its reward.
Food consumption is excessive
Measure health lost by monster type and round. Regular damage signals insufficient distance; one large spike indicates a mechanic, initiative problem or particular placement.
Compare a defensive correction with a speed correction. More Vitality absorbs the issue, while eliminating one target earlier may prevent more healing.
Weak opening turn and initiative
If Cra starts without a firing line, initiative alone offers nothing. Find the cell that creates a shot or prepares the following round. In teams, check whether a positioner or AP support should act first.
Conversely, opening before monsters in easy farming can remove a complete enemy action. Compare time and received damage with two orders over ten fights.
Area attacks rarely pay off
An area is weak when enemies spread, the centre resists or an ally occupies the useful cell. Count actual targets hit and enemies eliminated.
Raise or lower the threshold only after measurement. On some boards, a single-target sequence finishes sooner than a forced two-target area.
Spell points do not match the rotation
Compare the current turn with spells actually levelled. A tool used every battle deserves review before a prestigious situational spell. Check cost, range and effect progression across ranks.
The Cra spell order guide provides milestones, while logs reveal which ones serve the selected content.
Characteristics conflict with the build
Recalculate the cost of the next point through class soft caps. An expensive characteristic may contribute less than Vitality or Wisdom, especially when gear supplies most of the total.
Use the Cra characteristic guide, then compare minimum damage, survival and hourly XP instead of the visible score alone.
New gear produces no improvement
Check whether equipment created AP, MP, used range, a decisive critical threshold or a better finish. A marginal characteristic increase may not alter the turn count.
Restore the old set for a comparable series. If results match, resell the new piece or reserve it for content where resistance or initiative matters.
A popular area gives poor yield
Add search time, rejected boards, competition, food and banking. Monster level or a record XP result does not represent the complete loop.
Apply the Cra XP and farming zone method. A weaker dense target can produce more experience and net kamas.
Cra works alone but fails in a team
Inspect blocked lines, initiative, contradictory movement and buffs already supplied by allies. A solo profile may waste control or occupy a reserved cell.
Reassign functions with the Cra team composition guide. Test without changing gear so coordination remains the isolated variable.
Diagnose a MoonBot decision
The Cra combat configuration should leave an understandable trace: target, condition, rejected spell, movement and remaining AP. Replay the choice from information available at that round.
When two rules qualify, make priority explicit. When none qualifies, add a fallback or stop instead of hiding the gap with a random action.
Optimize without drawing a false conclusion
Build a thirty-battle set with labelled board profiles. Change one spell, target threshold, cell, item or order while preserving other conditions.
Compare median duration, win rate, food, unused AP and yield. Adopt a change only when it improves the objective without moving failure into a more dangerous case.
Frequent mistakes during analysis
- Changing element, equipment and area simultaneously.
- Using the mean without examining extreme boards.
- Optimising maximum rather than minimum damage.
- Confusing a safe victory with profitable yield.
- Correcting one incident without a repeated pattern.
- Deleting the previous version before comparison.
Cra diagnostic checklist
Describe the symptom, retain context, extract the failing decision, state a cause, choose a metric and copy the profile. Then run the comparison series.
Optimization is proven when results improve across several boards, the worst case remains controlled and the initial cause no longer appears in logs.
Botting breaches the game's terms of service and carries a sanction risk. No tool can guarantee that an account will never be banned.
