🔎 Diagnostics and optimisation

Dofus Retro Sram mistakes, diagnostics and optimisation

Diagnosing a Dofus Retro Sram positioning mistake during combat
Contents
  1. Reproduce the Sram error
  2. Classify the observed symptom
  3. Verify version, spells and inputs
  4. Diagnose low Sram damage
  5. Diagnose characteristic allocation
  6. Diagnose Sram equipment
  7. Diagnose spell levelling order
  8. Explain untriggered traps
  9. Fix an overlong trap network
  10. Fix unproductive Invisibility
  11. Fix a blocking Double
  12. Fix poor Fear placement
  13. Stabilise target priority
  14. Analyse death after Invisibility
  15. Reduce bread consumption
  16. Shorten slow Sram fights
  17. Diagnose poor hourly output
  18. Read the MoonBot combat log
  19. Test one isolated correction
  20. Follow an optimisation order
  21. Close the Sram diagnostic

Correcting Dofus Retro Sram mistakes means locating the earliest faulty choice. An untriggered trap, a missing exit and a slow fight may all start with a poor board filter. Changing gear, spells and rotation together hides the cause instead of proving it.

Use this workflow after the complete Retro Sram guide. Confirm effects in the client matching the active server before labelling behaviour a configuration defect.

Reproduce the Sram error

Record board, group, initiative order, positions, path, equipment and exact round. Seek two comparable occurrences before writing a general rule.

Keep a successful battle against the same family. Comparing the pair narrows possible causes faster than a broad feeling.

Classify the observed symptom

Separate illegal action, low damage, bypassed trap, wrong target, exposure, obstruction, slow play, high bread and poor net output. Defeat is merely the final result.

Pick one primary symptom for each investigation. Recheck secondary effects after the first divergence is corrected.

Verify version, spells and inputs

Confirm server, spell ranks, AP/MP, range, cooldown, resistance and actually equipped items. Old screenshots or conditional bonuses can invalidate the calculation.

Compare observed state with the loaded profile. When inputs differ, repair data before strategy.

Diagnose low Sram damage

Decompose base value, characteristic, fixed damage, percentage, resistance, roll and critical under active rules. Test against one known target rather than mixed monsters.

If individual calculations are correct, count offensive actions per round. Acceptable hits can still yield low throughput when positioning consumes too much AP or movement.

Diagnose characteristic allocation

Compare Strength, Agility, Vitality and Wisdom with thresholds that change combat. A point matters only through damage, movement, survival or experience rate.

Test redistribution under equal gear and groups. The Sram characteristics guide frames the soft-cap calculation.

Diagnose Sram equipment

Audit AP, MP, range, initiative, Strength or Agility, damage, vitality and resistance by slot. Identify the missed threshold rather than a fashionable missing item.

Compare total cost, not preview damage alone. One MP enabling placement, Fear and escape may beat a small offensive gain.

Diagnose spell levelling order

Count actual casts across thirty encounters. A highly ranked but unused spell locks points while Invisibility, Fear or finishing lacks a needed rank.

Respect the active client’s unlock order. Reassign by build and content, then measure before changing anything else.

Explain untriggered traps

Check entrance, eligible target, path, MP, obstacles, summons and movement method. Teleports or pushes can ignore the expected walking route.

Classify failure as poor prediction, newly occupied cell, consumed trap or absent trigger. Each category needs a different correction.

Fix an overlong trap network

Measure rounds before first damage, traps placed, effects activated and direct attacks forgone. A large final number can conceal unprofitable construction.

Cap setup at two or three rounds with minimum return per AP. The Sram network guide helps define entrance and trigger.

Fix unproductive Invisibility

Calculate damage avoided, position gained and attack prepared. If all remain zero, the effect only delayed the encounter.

Select an exit before casting and leave the hidden plan when danger is controlled. Remaining effect duration is not an objective.

Fix a blocking Double

Replay firing lines, allied paths, pushes, healing and escape cells after the summon. The strongest lock square may be the worst team square.

Score hostile actions actually changed. If none changes, move Double elsewhere or save the AP.

Fix poor Fear placement

Generate the final cell, collisions and next-round line before pushing. A successful trigger can still move the enemy beyond finishing range.

Compare trap damage, denied hostile action and pursuit cost. Skip the push where direct damage wins that balance.

Stabilise target priority

Rank immediate danger, healing, summons, detection, movement, resistance, health and finishing cost. Reward targets already carrying delayed effects.

Switch only after a material event such as lost access or a new threat. Otherwise poison and traps scatter across living enemies.

Analyse death after Invisibility

Reconstruct available MP, threat zones, lock, hostile range and cooldowns on the exposure round. The cause often appears two actions before revelation.

Reserve exit movement during the opening. Where no safe cell exists, shorten the sequence or use Double as a planned diversion.

Reduce bread consumption

Split incoming damage into approach, setup, contact, cooldown waiting and cleanup. Each phase suggests a separate answer.

Test initiative, MP, resistance, targeting or map filters before buying more vitality. Calculate cost per complete hour.

Shorten slow Sram fights

Measure combat time, first damage, first kill, last enemy and animations. Find which phase expands when one enemy is added.

Remove non-contributing actions: traps past lethal threshold, poison on a dying target, safe Invisibility and functionless Double.

Diagnose poor hourly output

Add travel, group search, recovery, banking and sale time. A perfect rotation cannot overcome a saturated area or unsold resources.

Compare XP and kamas separately using realised prices. Change route before build when combat is not the dominant cost.

Read the MoonBot combat log

Find the first difference between expected and observed state: rejected candidate, occupied cell, wrong score, stale trap registry or MP reserve. Ignore late symptoms initially.

Add an explicit field instead of a silent rule. A useful log explains both the winner and why alternatives lost.

Test one isolated correction

Duplicate the profile, change one variable and run thirty comparable fights. Preserve times, groups, boards and supplies where possible.

Compare median, worst quartile, failures and spread. Reject an average gain accompanied by a large incident increase.

Follow an optimisation order

Fix illegal actions and loops first, followed by survival, focus, finishing, setup, board selection and small damage gains. This order protects conclusions.

Buy new equipment only after proving the missing threshold. Logic mistakes often survive a gear replacement.

Close the Sram diagnostic

Document symptom, reproduction, version, first divergence, hypothesis, modification, sample and outcome. Include a rollback rule.

The case is closed when thirty comparable fights do not reproduce it and secondary indicators remain stable.

Botting breaches the game's terms of service and carries a sanction risk. No tool can guarantee that an account will never be banned.

Frequently asked questions

Why do my Sram traps fail to trigger?

Check path, MP, eligible target, occupation, teleport, summon interference and the presence of a manual trigger.

Why does my Sram deal low damage?

Verify client data, resistance, characteristics and real offensive actions before replacing equipment.

How can I shorten Sram battles?

Locate the slow phase and stop traps, Invisibility, poison or Double when they no longer approach a kill.

How do I diagnose a MoonBot error?

Read the first divergence in state, cell, candidate or AP/MP budget rather than only the final outcome.

How many fights validate a correction?

Run thirty comparable encounters and inspect median, worst quartile, spread and failure count.

Ready to automate Dofus Retro?

Create an account, add your characters and launch your first automation from a browser. There is no software or VPS to install.

Try MoonBot See pricing