The Water Bwak is one of those low-level monsters that punish unprepared players hard. Two full immunities — Neutral and Water — make two entire attack lines completely useless. If you play a Water class or only have Neutral spells available at this level, every fight becomes a PA drain for zero output.
With the right element, however, the Water Bwak falls fast and delivers solid XP between levels 16 and 20. Pick the correct element once, and MoonBot handles the rest without ever making a costly mistake.
The two immunities you must never ignore
The Water Bwak resistance table is unambiguous: 100% resistance to both Neutral and Water. This means any spell of these two elements deals zero damage — not reduced damage, zero. It is a total immunity, not a partial mitigation.
Many new players cast their standard spells against this monster and wonder why nothing happens. The answer is simple: Water and Neutral attacks are fully absorbed. You must switch to Earth, Fire or Air before engaging, no exceptions.
- Neutral: 100% resistance → full immunity, 0 damage
- Water: 100% resistance → full immunity, 0 damage
- Earth: 0% resistance → full effectiveness
- Fire: 0% resistance → full effectiveness
- Air: 0% resistance → full effectiveness
Choosing between Earth, Fire and Air
Since Earth, Fire and Air all sit at 0% resistance, the choice depends entirely on your class and available spells at levels 16-20. Earth is the recommended first pick: early classes like Sacrier, Osamodas and Feca have Earth spells with solid base coefficients available at low levels.
Fire is a strong alternative for Eniripsa or Cra players. Air works well for Rogue or Eliotrope if you have invested points in that branch. The key rule is to commit fully: drop Water and Neutral entirely for this farming session.
Planning your session to avoid resource waste
At levels 16-20, the Water Bwak's attacks are moderate for a properly geared character. With Earth or Fire at 0% resistance, the fight wraps up in 2-3 turns. Keep a healing spell available for groups of 3 that can stack damage.
Set up a farming circuit with a quick exit to a Phoenix whenever HP drops below 40%. Consistency matters more than raw speed per fight. A half-dead character wastes time on heals and risks dying, which breaks the rhythm entirely.
Actual returns: XP gained and drops to sell
Between levels 16 and 20, the Water Bwak provides steady XP progression, especially in group play where the coefficient multiplies gains per fight. Duos benefit most from this monster's low defences as long as both members use the correct element.
Feathers and other craft resources from drops feed recipes regularly in demand at the auction house. Check current prices before the session and adjust your sell strategy: keep rare resources, sell common ones immediately to avoid price dilution.
Automating with MoonBot: no wrong element, ever
This is exactly where MoonBot shines for the Water Bwak: it will never accidentally cast a Water or Neutral spell. The Lua script encodes the element strategy once in `fight.setStrategy`, and every fight executes precisely that strategy, session after session.
Start the script, let MoonBot loop through Water Bwaks, and come back to a character several levels higher. This is the edge of a bot that enforces the defined strategy consistently, unlike manual play where fatigue can lead to costly element mistakes.
Bwak d\'eau resistances
Resistance profile from the game data (★ = weakness, ∞ = immunity, ×2 = vulnerable):
| Element | Resistance | Note |
|---|---|---|
| Neutre / Neutral / Neutro | 100 % | ∞ |
| Terre / Earth / Tierra | 0 % | ★ |
| Feu / Fire / Fuego | 0 % | ★ |
| Eau / Water / Agua | 100 % | ∞ |
| Air / Air / Aire | 0 % | ★ |
Ready-to-use Lua script
Paste this script into MoonBot to automate it:
-- Farm Bwak d'eau : immunités Neutre + Eau → utiliser TERRE ou FEU ou AIR uniquement -- Terre est choisi ici car résistance = 0% -- Target monsters: Bwak d'eau function move() config.setBankThreshold(90) -- back to the bank at 90% pods return { { map = "MAP_1", path = "right", fight = true }, { map = "MAP_2", path = "right", fight = true }, { map = "MAP_3", path = "bottom", fight = true }, } end function bank() return { { map = "BANK_MAP", npcBank = true } } end function phoenix() return { { map = "PHOENIX_MAP", phoenix = true } } end -- Replace MAP_1, MAP_2… with the “x,y” coordinates of your maps.
Watch on YouTube




