Eleveur des Kwaks de Terre might look like an ordinary mid-game monster, but it offers a surprisingly solid XP and kamas opportunity for characters between levels 60 and 80. The trick lies in reading its resistances correctly and picking the right element – get that right and fights end in just a few turns.
This guide covers everything: resistance analysis, optimal element, how to chain fights efficiently, and how MoonBot can automate the entire loop for you.
Why farm Eleveur des Kwaks de Terre?
Eleveur-type monsters tend to appear in groups, which means you can stack fights without traveling far between them. In the level 60–80 bracket, that translates into a steady, reliable XP flow while you build up your stats before tackling dungeons.
On the kamas side, the resources dropped by this monster feed crafting professions. While exact drop rates vary, the sheer volume of fights you can chain in a session means those resources accumulate fast, covering consumable costs and generating net profit over time.
Reading resistances: why Air is the only real choice
The resistance profile of Eleveur des Kwaks de Terre is very clear-cut (see the resistance table). Neutral and Earth are both fully immune – 100% resistance means zero damage regardless of your spell power. Using Earth or Neutral spells here is a complete waste of turns.
Air, on the other hand, is this monster's primary weakness and has the lowest resistance in its profile. Water also carries a small vulnerability. Stacking Air damage dramatically shortens each fight, which is the single biggest lever for maximising your XP per hour. If you have the choice, go Air every time.
How to chain fights for maximum efficiency
Short fights are the engine of a good XP session. With Air spells hitting for boosted damage, you can realistically eliminate Eleveur des Kwaks de Terre groups in two or three turns. As soon as a group is down, locate the next one on the map and engage immediately – dead time between fights is lost XP.
Keep group sizes manageable, especially if you are not yet well equipped. Two or three Eleveurs at once is fine; larger groups stretch the fight and reduce your hourly efficiency. Prioritise the Eleveur over its Kwak companions since it may buff them.
- Open every fight with your strongest Air spell
- Target the Eleveur first to prevent ally buffs
- Use mobility spells to shorten travel time between groups
XP and kamas: what to expect from this farm
In the level 60–80 range, Eleveur des Kwaks de Terre competes well with other targets for XP density. Air-optimised fights end quickly, letting you stack a high number of groups per hour – which is ultimately what drives your XP rate.
The drops feed several crafting professions and consistently sell on the marketplace. Over a long session, the income from those sales more than covers consumable expenses. The farm becomes even more profitable when automated, since you maintain peak efficiency across many hours without fatigue.
Automate with MoonBot
MoonBot reproduces this exact strategy in a continuous loop. The Lua script below sets Air as the combat element, targets the weakest enemy first, and automatically engages every group of Eleveurs it finds. It runs indefinitely as long as the bot is active.
You can extend the script with move() or worldpath.go() calls to cover multiple maps and increase encounter density. MoonBot handles reconnections automatically and resumes the farm without any manual input.
Eleveur des Kwaks de Terre resistances
Resistance profile from the game data (★ = weakness, ∞ = immunity, ×2 = vulnerable):
| Element | Resistance | Note |
|---|---|---|
| Neutre / Neutral / Neutro | 100 % | ∞ |
| Terre / Earth / Tierra | 100 % | ∞ |
| Feu / Fire / Fuego | 0 % | — |
| Eau / Water / Agua | -5 % | ×2 |
| Air / Air / Aire | -15 % | ★ |
Ready-to-use Lua script
Paste this script into MoonBot to automate it:
-- Farm Eleveur des Kwaks de Terre (Air, cible la plus faible) -- Target monsters: Eleveur des Kwaks de Terre function move() config.setBankThreshold(90) -- back to the bank at 90% pods return { { map = "MAP_1", path = "right", fight = true }, { map = "MAP_2", path = "right", fight = true }, { map = "MAP_3", path = "bottom", fight = true }, } end function bank() return { { map = "BANK_MAP", npcBank = true } } end function phoenix() return { { map = "PHOENIX_MAP", phoenix = true } } end -- Replace MAP_1, MAP_2… with the “x,y” coordinates of your maps.
Watch on YouTube




