After clearing the very first mobs in Dofus Retro, you need a step-up target that stays easy to chain while offering better XP. Serpentin fits that gap perfectly, covering levels 6 to 14.
What makes it stand out is its resistance profile: Water and Air actually have negative values, meaning your spells deal more damage than listed. Any class that can cast Water or Air at these levels should be salivating.
Serpentin at a Glance: A Forgiving Mid-Tier Target
Serpentin spans levels 6 to 14 with no total immunities and no overwhelming counters. That makes it accessible regardless of your class, while still rewarding players who read the resistance table carefully.
It hits back with moderate damage, enough to require some attention but not enough to end a run if you stay topped off. The main skill tested here is sustaining fight chains without long downtime between engagements.
Negative Resistances: Why Water and Air Hit Harder
The resistance table for Serpentin shows something unusual at this level tier: Water and Air carry negative resistance values. In Dofus Retro, a negative resistance means incoming damage is amplified β your 50-damage Water spell actually lands for more than 50. This is a genuine multiplicative bonus, not just the absence of mitigation.
Neutral, Earth and Fire sit at a small positive resistance (around 18 %). They deal damage, but you are leaving points on the board. If your class has strong Water spells from level 1 β Eniripsa, Sram, or Xelor come to mind β lean into it fully.
- Water: negative resistance β damage amplified, best choice
- Air: negative resistance β damage amplified, strong alternative
- Neutral, Earth, Fire: small positive resistance β workable but sub-optimal
Fight Chaining Strategy for Maximum XP/Hour
At mid-tutorial levels the XP-per-hour metric hinges on how fast you can restart fights, not on raw damage per turn. Find dense areas with multiple Serpentin groups and work through them in a circuit before the first one respawns.
Keep your health above half between fights if possible. Serpentin damage is manageable, but taking a loss resets your momentum and wastes the time invested in the run.
XP Curve and Kamas: Is It Worth Your Time?
Serpentin covers the full stretch from level 6 to 14 cleanly. The XP curve peaks when you are within the mob's level range and tapers as you outgrow it, giving you a clear signal of when to move on.
Drops include crafting materials that see steady auction house demand. Without quoting exact rates, the consistent drop output makes Serpentin one of the better passive kamas earners at this stage of the game.
Set It and Forget It: MoonBot on Serpentin
MoonBot's Lua layer handles the full loop: target Serpentin by exact name, force Water element via fight.setStrategy, fight, collect drops, and immediately engage the next group. The while isRunning() structure means you control the stop condition cleanly from the dashboard.
The practical result is hours of uninterrupted farming β levels climbing in the background while you are away, inventory filling with sellable drops, zero manual input required. That kind of consistent mid-level grind is where MoonBot pays for itself fastest.
Serpentin resistances
Resistance profile from the game data (β = weakness, β = immunity, Γ2 = vulnerable):
| Element | Resistance | Note |
|---|---|---|
| Neutre / Neutral / Neutro | 18 % | β |
| Terre / Earth / Tierra | 18 % | β |
| Feu / Fire / Fuego | 18 % | β |
| Eau / Water / Agua | -15 % | β |
| Air / Air / Aire | -5 % | Γ2 |
Ready-to-use Lua script
Paste this script into MoonBot to automate it:
-- Farm Serpentin : Eau et Air sont vulnerables (<0%), a maximiser -- Neutre/Terre/Feu ont une petite resistance positive : acceptable mais sous-optimal -- Target monsters: Serpentin function move() config.setBankThreshold(90) -- back to the bank at 90% pods return { { map = "MAP_1", path = "right", fight = true }, { map = "MAP_2", path = "right", fight = true }, { map = "MAP_3", path = "bottom", fight = true }, } end function bank() return { { map = "BANK_MAP", npcBank = true } } end function phoenix() return { { map = "PHOENIX_MAP", phoenix = true } } end -- Replace MAP_1, MAP_2β¦ with the βx,yβ coordinates of your maps.
Watch on YouTube




