From level 330 onwards, Touchparak is one of the most efficient mobs to grind for XP and kamas. Its resistance profile is clearly defined — including a full Neutral immunity — but its multiple elemental vulnerabilities let you deal heavy damage with the right school.
This guide covers how to read the Touchparak resistance table, which element to use, and how to automate farming with MoonBot for non-stop runs.
Why Farm Touchparak?
Monsters in the 330-350 level range generate some of the highest XP per fight in Dofus Retro. Touchparak belongs to this tier: each victory translates into a substantial experience gain, whether you are playing solo or in a small group.
Its drops, while variable like any monster, consistently supply the marketplace and help offset consumable costs over time. The XP-per-minute ratio makes it a reference grind spot for characters aiming to cap their progression.
Reading Resistances: Air is King
Before any serious grind session, check the resistance table (see the resistance table). For Touchparak, the picture is clear: Neutral damage is fully immune at 100%, meaning every neutral hit deals zero damage. Do not play a neutral class here.
All four active elements are vulnerable: Earth at -15%, Fire at -15%, Water at -15%, and most importantly Air at -18%. Air is the primary weakness — the only element that deals above-average damage. An Air-built Eniripsa or Cra gains a decisive edge against this mob.
If your class has both an Air spell and an Earth/Fire/Water spell, prioritize Air in your gear setup. The 3-point gap between -18% and -15% compounds significantly across hundreds of fights.
How to Chain Fights Safely
Touchparak ranges from level 330 to 350: the power variance within a group can be significant. Before diving in, make sure you are geared enough to absorb several turns if Touchparak acts first, and always keep emergency heals available.
The ideal loop is: engage, burst down targets with Air spells starting with the nearest, then reposition for the next group immediately. A short cooldown between fights preserves your resources and cuts the risk of accidental death.
In a group, assign a healer or protector to soak damage from the highest-level Touchparak. Consistency in the engage-kill-move cycle is the foundation of a profitable farm session.
- Prioritize Air spells to exploit the main weakness.
- Avoid all Neutral spells: full immunity, zero damage.
- Focus on the nearest target to end fights quickly.
- Elemental resistances in gear are strongly recommended.
Profitability: XP, Drops and Kamas
At this level range, each Touchparak fight yields XP proportional to its high tier. Chaining groups without downtime can turn a session into a very productive run, especially for closing a level or unlocking a new power threshold.
On the kamas side, high-level monster drops feed an active marketplace. Without citing exact rates, this mob category is well-known for resources sought by crafters and gear-hunters alike.
Automate the Farm with MoonBot
MoonBot includes a Lua engine that lets you loop Touchparak fights without manual input. Just configure the Air element in the combat strategy, target Touchparak by name, and let the bot handle the cycle.
The script below shows a basic farming loop: Air strategy is enforced, the nearest target is engaged first, and a one-second delay between fights prevents false detection triggers. You can extend the script with worldpath.go calls to roam between spawn areas and maximize combat density.
Touchparak resistances
Resistance profile from the game data (★ = weakness, ∞ = immunity, ×2 = vulnerable):
| Element | Resistance | Note |
|---|---|---|
| Neutre / Neutral / Neutro | 100 % | ∞ |
| Terre / Earth / Tierra | -15 % | ×2 |
| Feu / Fire / Fuego | -15 % | ×2 |
| Eau / Water / Agua | -15 % | ×2 |
| Air / Air / Aire | -18 % | ★ |
Ready-to-use Lua script
Paste this script into MoonBot to automate it:
-- Farm Touchparak (niv 330-350) element Air -- Vulnerabilite maximale : Air -18 % + Terre/Feu/Eau -15 % -- Immunite Neutre : eviter absolument les degats neutres -- Target monsters: Touchparak function move() config.setBankThreshold(90) -- back to the bank at 90% pods return { { map = "MAP_1", path = "right", fight = true }, { map = "MAP_2", path = "right", fight = true }, { map = "MAP_3", path = "bottom", fight = true }, } end function bank() return { { map = "BANK_MAP", npcBank = true } } end function phoenix() return { { map = "PHOENIX_MAP", phoenix = true } } end -- Replace MAP_1, MAP_2… with the “x,y” coordinates of your maps.
Watch on YouTube




