Around level 30, few enemies offer as sharp an elemental profile as the Wabbit Skeleton. Its Water resistance sits at exactly 0 %, while Neutral and Earth both hit 58 %. That gap is your entire strategy in one number.
This guide walks through how to exploit the Water weakness with precision, how to build a tight fight loop in the 28-32 bracket, and how MoonBot automates this farm so every minute of idle time becomes XP and kamas.
Wabbit Skeleton: a mob purpose-built for Water classes
The Wabbit Skeleton sits in the 28-32 level range and is one of the cleaner XP targets of that bracket. Its total Water weakness (0 % resistance) means every Water hit lands at full power — no reduction, no rounding, nothing absorbed.
For an Eniripsa, a Sadida, or a Water-oriented Cra, this translates into two-to-three turn kills as a realistic baseline. The flip side: Neutral and Earth resistance both stand at 58 %, making those elements largely wasted damage. Using the wrong element here is not a minor inconvenience — it cuts your effective damage by more than half.
Resistance breakdown: Water only, no exceptions
Full numbers are in the resistance table on this page. The headline: Neutral and Earth at 58 % — nearly two-thirds of damage absorbed, skip both. Fire and Air sit at 46 %, workable if you have no Water kit. Water at 0 %: the clear and only primary choice.
A 0 % Water resistance in the level-30 bracket is uncommon. Enemies that sit in this range usually have some mitigation across the board. Wabbit Skeleton does not — it is a genuine elemental opportunity that rewards class specialization.
- Water (0 %): exploit this without compromise
- Neutral / Earth (58 %): avoid entirely
- Fire / Air (46 %): acceptable secondary option
Building a tight farm loop at level 30
Level 28-32 is a pivotal moment: you have enough spells for a real rotation, but resources and gear are still limited. The single most important habit in this bracket is staying in Water every single fight. The temptation to switch is real when cooldowns overlap — resist it.
With two-to-three turn kills, you will rarely need extended recovery between fights. Keep a light HP potion on hand for unexpected rough fights, then focus on minimizing movement between spawn groups. A tight loop beats a wide patrol every time for hourly XP.
Level-30 XP and drops: a serious time-to-reward ratio
Wabbit Skeleton XP is calibrated for the 28-32 bracket — meaningful enough to push you through it with momentum. Combine short fights (Water kills fast) with regular spawns, and you land on a progression pace that feels rewarding rather than grinding.
Drops from this mob family feed crafting recipes for level-30 gear sets still traded on Retro auction houses. Exact prices vary by server, but skeletal and wabbit-family resources tend to cycle steadily through the market — a solid kamas side income on top of your XP gains.
Set MoonBot to Water and walk away
The Lua script above locks in the Water strategy, targets Wabbit Squelette by exact name, and loops until you stop the session. MoonBot does not drift — it will not switch elements mid-session, misfire on the wrong mob, or skip a spawn.
Two to three hours of automated Water farming on this target produces visible XP progress and a meaningful drop haul. The fight.setStrategy({element='eau'}) + engage combination keeps everything consistent, session after session, without any manual intervention.
Wabbit Squelette resistances
Resistance profile from the game data (★ = weakness, ∞ = immunity, ×2 = vulnerable):
| Element | Resistance | Note |
|---|---|---|
| Neutre / Neutral / Neutro | 58 % | — |
| Terre / Earth / Tierra | 58 % | — |
| Feu / Fire / Fuego | 46 % | — |
| Eau / Water / Agua | 0 % | ★ |
| Air / Air / Aire | 46 % | — |
Ready-to-use Lua script
Paste this script into MoonBot to automate it:
-- Farm Wabbit Squelette -- faiblesse Eau (résistance 0 %) -- Target monsters: Wabbit Squelette function move() config.setBankThreshold(90) -- back to the bank at 90% pods return { { map = "MAP_1", path = "right", fight = true }, { map = "MAP_2", path = "right", fight = true }, { map = "MAP_3", path = "bottom", fight = true }, } end function bank() return { { map = "BANK_MAP", npcBank = true } } end function phoenix() return { { map = "PHOENIX_MAP", phoenix = true } } end -- Replace MAP_1, MAP_2… with the “x,y” coordinates of your maps.
Watch on YouTube




